通过认证
“T8日光灯铝支架，LED铝支架，挤压成型铝支架”参数说明
| 颜色： | 白色 | 接口类型： | 卡口支架 |
| 材质： | 铝 | 规格： | 600 900 1200mm |
“T8日光灯铝支架，LED铝支架，挤压成型铝支架”详细介绍
材质：采用优质铝合金材料，厚度0.4mm，表面采用喷塑工艺处理，环保节能，美观实用；
适配光源：T8 T10 LED日光灯管；产品长度有0.6米、0.9米、1.2米三种规格，同时可以根据客户的要求，订制非标长度的产品；
配件材质：导线和灯座采用阻燃材料，布线整齐，支架脚座采用径向推进旋转式设计，保证灯管脚与支架座接触良好，方便安装LED灯管；
线芯采用标准双芯0.5平方铜芯线，焊锡连接灯座，安全耐用；
包装方式：中性纸箱包装；
安装方式：吸项式，可多支串连连接；
适应场所：办公室、商场、餐厅、工厂、学校等。
The aluminum frame of LED made in Liansheng[LS-806] has advantages as follow: Its material is made from high quality alloy aluminum, The features of aluminum frame are portable and beautiful, Concise and easy ,difficult to rust, easy to install and so on;
Aluminum frame is made through extrusion; thickness of frame wall is 0.4mm, surface of the frame is processed by spray technology， so it has a good appearance
Match LED: T8 T10 LED fluorescent tube
Length of the Products has four specifications: 0.6 m, 0.9 m, 1.2 m and 1.5 m, the length of
the match LED fluorescent tube are 598mm(9w) 894mm(12w),1198mm(18w),1498mm(24w)( Do not contain tube pin),
we can also made products with non-standard length according to customer requirements in the same time
Parts Materials: wire and lamp base are made of flame retardant materials, wiring tidily, the bracket foot pedestal adapt the radial rotary design
Make sure the lamp base and the bracket foot pedestal contact well, the LED fluorescent tube is easy to be installed
core of the wire use rvb 2*0.5 double-core red-black wire (wire use pro-environment, antiflaming, no copper oxide materials , acquire the European Union RoHS certification, etc)
Use automatic wire stripping machine , after soldering then connect to the lamp base ,make sure to be strong and durable
Mode of connection adapt double-ended wiring pattern, both ends of the stent can make connect with the power cord, LED lamp will be lighted if either side of It is powered
适配光源：T8 T10 LED日光灯管；产品长度有0.6米、0.9米、1.2米三种规格，同时可以根据客户的要求，订制非标长度的产品；
配件材质：导线和灯座采用阻燃材料，布线整齐，支架脚座采用径向推进旋转式设计，保证灯管脚与支架座接触良好，方便安装LED灯管；
线芯采用标准双芯0.5平方铜芯线，焊锡连接灯座，安全耐用；
包装方式：中性纸箱包装；
安装方式：吸项式，可多支串连连接；
适应场所：办公室、商场、餐厅、工厂、学校等。
The aluminum frame of LED made in Liansheng[LS-806] has advantages as follow: Its material is made from high quality alloy aluminum, The features of aluminum frame are portable and beautiful, Concise and easy ,difficult to rust, easy to install and so on;
Aluminum frame is made through extrusion; thickness of frame wall is 0.4mm, surface of the frame is processed by spray technology， so it has a good appearance
Match LED: T8 T10 LED fluorescent tube
Length of the Products has four specifications: 0.6 m, 0.9 m, 1.2 m and 1.5 m, the length of
the match LED fluorescent tube are 598mm(9w) 894mm(12w),1198mm(18w),1498mm(24w)( Do not contain tube pin),
we can also made products with non-standard length according to customer requirements in the same time
Parts Materials: wire and lamp base are made of flame retardant materials, wiring tidily, the bracket foot pedestal adapt the radial rotary design
Make sure the lamp base and the bracket foot pedestal contact well, the LED fluorescent tube is easy to be installed
core of the wire use rvb 2*0.5 double-core red-black wire (wire use pro-environment, antiflaming, no copper oxide materials , acquire the European Union RoHS certification, etc)
Use automatic wire stripping machine , after soldering then connect to the lamp base ,make sure to be strong and durable
Mode of connection adapt double-ended wiring pattern, both ends of the stent can make connect with the power cord, LED lamp will be lighted if either side of It is powered
